Preparation and adsorption property of novel inverse-opal hierarchical porous N-doped carbon microspheres

The design of pore structure is the key factor for the performance of porous carbon spheres.In this wo rk,novel micron-sized colloidal crystal microspheres consisting of fibrous silica(F-SiO_2) nanoparticles are firstly prepared by water-evapo ration-induced self-assembly of F-SiO_2 nanoparticles in the droplets of an inverse emulsion system to be used as sacrificial templates.Acrylonitrile(AN) was infiltrated in the voids of the F-SiO_2 colloidal crystal microspheres,and in-situ induced by ~(60)Co y-ray to polymerize into polyacrylonitrile(PAN).After the PAN-infiltrated F-SiO_2 colloidal crystal microspheres were carbonized and etched with HF solution,novel micron-sized inverse-opal N-doped carbon(IO-NC) microspheres consisting of hollow carbon nanoparticles with a hierarchical macro/meso-porous inner surface were obtained.The IO-NC microspheres have a specific surface area as high as 266.4 m~2/g and a molar ratio of C/N of 5.They have a good dispersibility in water,and show a high adsorption capacity towards rhodamine B(RhB) up to 137.28 mg/(g microsphe re).This work offers a way to obtain novel micron-sized hierarchical macro/meso-porous N-doped carbon microspheres,which opens a new idea to prepare high-performance hierarchical porous carbon materials.     

A co-activation strategy for enhancing the performance of hematite in photoelectrochemical water oxidation

Hematite(α-Fe_2O_3) is a promising photoanode for photoelectrochemical(PEC) water splitting.However,the severe charge recombination and sluggish water oxidation kinetics extremely limit its use in photohydrogen conversion.Herein,a co-activation strategy is proposed,namely through phosphorus(P)doping and the loading of CoAl-layered double hydroxides(CoAl-LDHs) cocatalysts.Unexpectedly,the integrated system,CoAl-LDHs/P-Fe_2O_3 photoanode,exhibits an outstanding photocurrent density of 1.56 mA/cm~2 at 1.23 V(vs.reversible hydrogen electrode,RHE),under AM 1.5 G,which is 2.6 times of pureα-Fe_2O_3.Systematic studies reveal that the remarkable PEC performance is attributed to accelerated surface OER kinetics and enhanced carrier separation efficiency.This work provides a feasible strategy to enhance the PEC performance of hematite photoanodes.     

用于锂硫电池高效硫载体的Co-N-C@KB复合材料的规模化制备策略

硫正极较差的性能严重阻碍了锂硫电池的商业化进程,这些因素包括较低的导电能力以及在促进多硫化物转化方面较差的催化活性。我们开发了一种基于配体调控合成和低温热解的规模化策略来制备高效的正极复合材料（Co-N-C@KB）,这种材料由富含Co-N-C活性位点的科琴黑（KB）组成。原子级分散的Co-N-C活性位点被证明有利于多硫化物在正极的转化,因而可以提高锂硫电池的容量和循环寿命。基于此,Co-N-C@KB作为正极可以使锂硫电池获得高达1 442 mAh·g^-1的初始放电容量,并且该电池在长时间的稳定性测试中具有出色的容量保持能力。     

Mo掺杂调控电子结构增强NiS电催化固氮性能

以泡沫镍为骨架,通过水热法制备了Mo掺杂的NiS多级纳米花状结构(Mo-NiS)。在偏压为-0.7 V(vs RHE)下,2 h内,0.83 Mo-NiS(制备时钼、镍物质的量之比为0.83)的电催化固氮速率平均可达4.21μg·cm~(-2)·h~(-1),法拉第效率平均为18%。XPS测试和DFT计算表明,Mo掺杂增加了Ni活性位点周围的电子云密度,提高了电荷传输速率,促使*NNH_2到*N能垒大幅度降低,从而提升了电催化固氮效率。     

氮硫共掺杂多孔碳材料的制备及其在锂硫电池中的应用

锂硫电池因其较高的理论容量和对环境友好等优势被视为极具发展潜力的储能装置,但是多硫化物的穿梭效应极大地限制了锂硫电池的实际应用。本文以葡萄糖为碳源,离子液体为氮源和硫源,KCl和ZnCl₂为模板剂,KOH为活化剂,通过热解工艺合成了氮硫共掺杂多孔碳（NSPC）。XPS和极性吸附实验表明N、S杂原子成功引入并且提高了碳材料对多硫化物的吸附能力,有效缓解多硫化物的穿梭效应,而较高的比表面积（1290.67 m²·g^-1）有助于提高硫负载量。负载70.1wt.%的硫后（S@NSPC）作为锂硫电池的正极材料表现出了良好的电化学性能。在167.5 mA·g^-1的电流密度下S@NSPC的首次放电容量为1229.2 mAh·g^-1,远高于S@PC的861.6 mAh·g^-1,且S@NSPC循环500圈后容量为328.1 mAh·g^-1。当电流密度从3350 mA·g^-1恢复至167.5 mA·g^-1时,可逆容量达到首圈放电比容量的80%,几乎恢复至其初始值。     

芥子气中毒人员尿液标记物谱分析及其临床诊断应用

该研究基于暴露生物标记物溯源思路,应用于解决芥子气(SM)临床早期诊断、溯源确证难题。建立了芥子气中毒患者尿液中7种游离代谢产物的两步固相萃取/超高效液相色谱-串联质谱(SPE/UPLC-MS/MS)同时定量方法,检出限为5 pg/mL~1 ng/mL,定量下限为10pg/mL~5 ng/mL;结合前期建立的4种游离碱基加合物的同位素稀释-UPLC-MS/MS定量方法,对1例疑似芥子气中毒人员尿液中可能赋存的生物标记物进行了全筛查分析。尿液中共检出3类10种生物标记物,包括首次报道的游离代谢产物芥子亚砜,可确证患者为芥子气中毒;除硫二甘醇外,标记物含量均在暴露后3~4 d达到峰值,随后降低,至7 d仍可检出,其中谷胱甘肽加合物的β裂解产物含量相对较高,可作为芥子气中毒早期诊断与疗效评估的重要指标。     

Partial P-Type Metal Ions Doping Induced Variation of Both Crystal Structure and Oxygen Vacancy Within Cu/SnO2 Metastable Solid Solution Nanofibers for Highly Sensitive C2H2 Sensor

Partial P-type metal ions doping(PPMID) is an alternative method to further enhance the gas sensing performance of N-type metal oxides(NMOs) in contrast to that of P-N metal oxides heterojunctions, but the influences of the introduction of PPMID on the grain size and oxygen vacancies of NMOs have been rarely investigated. Herein, a simple and effective route has been demonstrated to address this problem with Cu²⁺-doped SnO₂ metastable solid solution nanofibers(CSMSSNs) as model and C₂H₂ as target molecule by combining electrospinning and calcination technique. It seems that the introduction of PPMID can also affect crystal structure and oxygen vacancies of NMOs, proven by combining X-ray diffraction(XRD) and X-ray photoelectron spectra(XPS). Thus, PPD, crystal structure and oxygen vacancies have been combined to clarify the enhanced sensing performance of Cu-doped SnO₂ metastable solid solution nanofibers angainst C₂H₂.     

Br~-掺杂Bi_2WO_6的水热法合成及其可见光催化性能

以Bi(NO_3)_3·5H_2O和Na_2WO_4·2H_2O为主要原料,采用水热法合成了纯相Bi_2WO_6,并对其进行非金属离子Br-掺杂改性。采用XRD、SEM、TEM、XPS、Raman、PL和DRS研究了Br~-掺杂对Bi_2WO_6的物相结构、形貌和可见光催化性能的影响。结果表明,Br-掺杂可有效提高Bi_2WO_6的可见光催化性能,当掺杂量(物质的量百分数)为8%时,溴掺杂Bi_2WO_6的光催化性能最好,可见光照射40 min后,可降解96.73%的罗丹明-B,与未掺杂Bi_2WO_6相比,其降解率提高了36.32%。     

镧系离子掺杂的近红外复合光催化剂的合成研究进展

近红外光能量占太阳能的44%,但是传统半导体光催化剂难以利用近红外光,因此制备近红外光催化剂是近几年来的研究热点。本文阐述了镧系离子掺杂的近红外光催化剂催化的基本原理,综述了镧系离子掺杂上转换纳米材料/半导体复合近红外光催化剂的合成方法及特点,重点介绍了外延生长法,静电纺丝法与化学组装法。并对这些近红外光催化材料在光降解污染物和光解水领域的应用进行了总结并对其应用前景进行了展望。     

A review of transition metal chalcogenide/graphene nanocomposites for energy storage and conversion

Recent advances in the applications of transition metal chalcogenides/graphene (TMC/graphene) nanocomposites in future energy storage and conversion are reviewed. The synthesis processes and structures of TMC/graphene, workingpriciple of evergy energy device, and the electrochemical performances are summarized.